Air conditioner ERGO ACM-0707C

  • Type: monoblock
  • Thermal power: 2100 W
  • Heating Area: 20 m2

CREATE YOUR PERSONAL MICROCLIMATE

Mobile air conditioners ERGO can be used in rooms where a split-system installation is impossible or you need to transport air conditioner from place to place. For its installation, no special tools and knowledge are required: for summer operation, it is sufficient to install a corrugated air duct to drain hot air, which is in the set of air conditioner. Mobile air conditioners ERGO are easy to operate. They are equipped with a remote control and have small dimensions due to the usage of automatic evaporation of condensate (only for summer operation).

LOTS OF USEFUL FUNCTIONS

Options for the series of mobile air conditioners ERGO:

  • Technology of condensate automatic evaporation: reducing humidity without lowering the temperature.
  • Moisture reduction mode without temperature reduction.
  • Comfort sleep mode for 8 hours.
  • 24-hour timer for switching on and off.
  • Function of automatic restart with the memorization of settings.
  • Function of memorizing the angle of inclination of the jalousie.
  • Electronic control with LED display.
  • Self-diagnosis of malfunctions of the air conditioner: in case of an error, the air conditioner automatically turns off to prevent further damage, and the display shows the error code.
  • Washable filter.
  • Ozone-safe freon R410A.
Air conditioner type Monoblock
Indoor units type Mobile
TM ERGO
Series Smile
Model ERGO ACM-0707C
Vendor code ACM-0707C
Productivity (cooling/heating), BTU/h 7,000
Compressor control ON-OFF
Recommended space area* up to 20 sq.m.
Operational parameters
Cooling power, W 2,100
Cooling energy efficiency ratio EER 2.61
Indoor sound power (max / w / min / silent), dB(A) 44 / 40 / 36 / -
Indoor block noise level (max / w / min / silent), dB(A) 53 / 52 / 51 / -
Dehydration, l/h 1.5
Air flow, indoor unit, (max), m³/h 350
Operating temperature range for indoor unit (cooling / heating), °C 17…+35
Voltage supply 220-240 V / 50 Hz /1 f
Rated cooling capacity, W 804
Rated current cooling, A 3.8
Modes of operation, functions, technical features
Control via the Internet No
TURBO cooling / heating mode Yes
Ventilation Yes
Heating No
Air dryer Yes
Automatic mode No
Night mode Yes
Auto restart function Yes
Defrost system Yes
The function of memorizing the angle of inclination of the louver Yes
Self-diagnosis function Yes
Other functions Automatic condensate evaporation technology
Anti-dust washable filter Yes
Hydrophilic coating of heat exchanger plates yes
On / Off timer 24 hours
Remote control IR remote with LCD
Control of the air supply direction (up / down) from the remote control
Control of the air supply direction (left / right) manual
Temperature range setting, °C 18 ... 30
Display of operating modes LED display
Weight-dimensional parameters
Indoor block dimensions (H x W x D), mm 270 x 480 x 695
Indoor unit in packing (W x D x H), мм 329 x 534 x 874
Weight of the indoor unit NETTO, kg 26.0
Weight of the indoor unit GROSS, kg 30.0
Equipment RC set of batteries for the remote control, user manual, exhaust pipe 1.5 m, air duct attachment panel to the window
Manufacturer country China
Warranty 30 months
Characteristics for installers
Compressor type Rotary
Type of refrigerant R410A
Refueling with refrigerant, g 360
Length of the exhaust pipe, м 1.5
2420613.pdf (24,25 мб) User manual ERGO ACM-0707C