Electric convector ERGO HC 2020E

  • Type: electric convector
  • Power: 2000 W
  • Heating area: 20 m2

GUARANTEE OF YOUR COMFORT

ERGO convectors are designed for both main and additional domestic space heating. Using convectors as the main source of heating, the device is mounted permanently on the wall with a help of brackets. Using convectors for additional heating, the device can be mounted on wheeled platforms. Brackets and wheeled platforms are included in delivery. ERGO electric convectors stand out for high efficiency due to X-shaped aluminum heating element with a large heat transfer area and efficient design of the device, which allows air to flow effectively to the heating element.

WARM UP EVERY SPACE

E series models are equipped with a thermostat for setting and maintaining the desired room temperature from 15 to 40 degrees Celsius, a two-level power regulator, a 24-hour on and off timer to save energy. All devices are equipped with overheating protection as standard. The model range of electric convectors includes devices with a power of 1000/1500/2000 W, and has a splash proof design (IP X4), which allows to use it in the bathrooms.

A choice of the nominal power of the electric convector when using it as the main heating source for domestic space is calculated on the basis of 100 W per 1 m2 of area (for winterized rooms with a ceiling height of no more than 2,5 m). A more accurate choice of the rated power of the device should be carried out taking into account the actual heat loss of each room.

Heater type Electrical convector
Series E
TM ERGO
Vendor code HC 2020E
Model ERGO HC 2020E
Color white
Recommended space area* up to 20 sq.m.
Arease of usage Bathrooms/Home-office
Installation method Floor/Wall-mounted
Operational parameters
Maximum power consumption 2000
Modes of operation 1000 / 2000
Setting range of electronic thermostat, °С +15…+40
Voltage / frequency of the network, V / Hz 220-240 / 50
Rated current, A 8.7
Design features
Heating element X-shaped (cast)
Thermostat Electronic
Display of operating modes Display
Electronic thermometer Yes
Timer 24 hours shutdown
Power cable length, mm 1400
Housing material metal
Other features
Turning on indication Yes
Operating mode indication Yes
Indication of the current room temperature Yes
Indication of the set room temperature Yes
Timer display Yes
Security
Degree of housing protection IPX4
Overheat protection Yes
Electrical protection class** I
Staffing
Wheels / support Yes
Wall mount Yes
Set of fasteners Yes
Руководство по эксплуатации и гарантийный талон Yes
Weight-dimensional parameters
Dimensions (H x D x W), mm 425 х 775 х 90
Dimensions (on wheels / supports / floor stand / mount) (H x W x D) 500 х 775 х 250 (on wheels)
Package Dimensions (H х D х W), мм 505 х 815 х 120
Net weight, kg 4.4
Gross weight, kg 5.4
Manufacturer country China
Barcode 6900064703999
* Using the device as the main one for heating a room with standard insulation and with a ceiling height of 2.5 m
** ДСТУ IEC 61140: 2005 Protection against electric shock. General aspects of installations and equipment (IEC 61140: 2001, IDT)
2474013.pdf (2.89 мб) User manual ERGO HC 2020E